Workflows

For DTF, print white over color; for DTG, print color over white; UV may use either order according to the material.

Production flow

DTF preflight and sample checklist

• DTF prints white over color.
• Use a matching DTF profile; support does not cover arbitrary hardware, ink, or film.
• Match transfer film, printer, ink, media, and the selected profile.
• Check mirror, layer order, white ink, and physical channel mapping.
• Print a sample and inspect color, white coverage, position, and media feed.
• Perform powdering, baking, and heat pressing outside Yink Studio under the device and material process.

DTG preflight and sample checklist

• DTG prints color over white.
• Use a matching DTG profile; support does not cover arbitrary garment hardware.
• Match the garment or media, printer, ink, and quality configuration.
• Check placement, output direction, white ink, choke, layer order, and physical channels.
• Set mirror only when required by the actual process and current configuration.
• Print a sample and verify color, white coverage, position, and media feed.

UV preflight and sample checklist

• UV may use either white over color or color over white.
• Use a matching UV profile; support does not cover arbitrary UV hardware or substrates.
• Match printer profile, substrate, ink, ICC, job, and resolution.
• Check white ink, layer order, mirror, substrate placement, page size, and direction.
• Print a calibration sample and verify color, white coverage, position, and media feed.
• Perform curing and safety operations outside Yink Studio under the device and material process.

Path boundaries

Projects store preset differences and layout, not a portable hardware snapshot. After changing printers or losing a queue, reselect compatible presets and output, then validate a sample.